joeYour machine is very good, the service and after-sales service are very good, my team and I are very satisfied, and I will find you next time I buy
PE Coated Paper Cup Lid Making Machine / Paper Coffee Cup Machine
|Model||High Speed Intelligence Model Paper Cup Machine JBZ-OCM12||Paper Cup Size||2~16 OZ(Mould Exchangeable,Max Cup Height: 136mm,Max Bottom Width: 76mm|
|Rated Speed||75-85pcs/min (Speed Affected By Cup Size,paper Quality & Thickness)9OZ,280GSM Paper Cup Stable Running Speed 80 Pcs Each Min.||Raw Material||One Or Two SidePE Coated Paper(Popular For Hot And Cold Drink Cups)|
|Power Source||50/60HZ,380V/220V(better Use 380V,3 Phase)or Special Power Requirement.||Cup Bottom Knurling||Heater Knurling(ifuse Single PE Coated Paper)|
3Phase Paper Coffee Cup Machine,
PE Coated Paper Coffee Cup Machine,
0.4MPa Paper Coffee Cup Machine
paper cup machine dubai paper cup lid making machine the coffee cup paper machine
Machine model: high-speed simple paper cup machine
Backside Soldering : Copper Heater Ultrasonic Heater
Raw material : single side PE coated paper (popular hot drink cup) single/double PE coated paper (popular hot drink cup and cold drink cup)
Total weight : Gw /NW:1750 kgs/1650 KgS.
Working air source (ultrasonic): Air pressure 0.4MPa a. machine.
Cup bottom heating: heater knurling (single-sided PE paper is heated and knurled; double-sided PE paper is knurled with cooling device circular water.)
Bottom knurling: heat knurling (if using single layer PE coated paper)
High-quality brand electrical systems, such as Delta, Schneider.
The PLC control system adopts the Delta brand, which is made in Taiwan and is reliable.
The bttom paper feeding is controlled by servo motor and stepping motor,which greatly improve paper feeding in high precision and
high efiency way.(more stable ,less troubles and save bottom paper)
Paper size :
2~16 oz (replaceable die, max cup height 136mm, max bottom width 76mm.)
70-80 per minute (the speed is affected by the size of the paper cup, paper quality and thickness), the running speed is stable, 75 per minute
|50/60 Hz.380V/220V (preferably use 380V, 3Phase) or special power requirements|
Total power :
6.5 kw, 7.5 kw.
|Total weight :||Gw /NW:1750 kgs/1650 Kgs.|
Excerpted from the Internet, for reference only
Pulling the barrel to feed the material, the positioning is more accurate, the width of the raw material can be controlled to the minimum, and the cost is saved.
The length and size of the finished product are uniformly controlled, with a deviation of ±1mm, which can effectively control the length of the finished product.
Sixth, the equipment has a high degree of automation, and the operator has low requirements. It only needs to stake out and arrange the finished product.
Using the ultrasonic system, the performance is stable and easy to operate.