joeYour machine is very good, the service and after-sales service are very good, my team and I are very satisfied, and I will find you next time I buy
High Speed Disposable Paper Cup Manufacturing Machine 380V 3 Phase
|Model||High Speed Intelligence Model Paper Cup Machine JBZ-OCM12||Paper Cup Size||2~16 OZ(Mould Exchangeable,Max Cup Height: 136mm,Max Bottom Width: 76mm|
|Rated Speed||75-85pcs/min (Speed Affected By Cup Size,paper Quality & Thickness)9OZ,280GSM Paper Cup Stable Running Speed 80 Pcs Each Min.||Raw Material||One Or Two SidePE Coated Paper(Popular For Hot And Cold Drink Cups)|
|Power Source||50/60HZ,380V/220V(better Use 380V,3 Phase)or Special Power Requirement.||Cup Bottom Knurling||Heater Knurling(ifuse Single PE Coated Paper)|
3 Phase Paper Cup Manufacturing Machine,
Paper Cup Forming Machine 380V
machines to produce paper cups cup paper printer machine paper cup machinery
Machine model: high-speed simple paper cup machine
Backside Soldering : Copper Heater Ultrasonic Heater
Raw material : single side PE coated paper (popular hot drink cup) single/double PE coated paper (popular hot drink cup and cold drink cup)
Total weight : Gw /NW:1750 kgs/1650 KgS.
Working air source (ultrasonic): Air pressure 0.4MPa a. machine.
Cup bottom heating: heater knurling (single-sided PE paper is heated and knurled; double-sided PE paper is knurled with cooling device circular water.)
Bottom knurling: heat knurling (if using single layer PE coated paper)
High-quality brand electrical systems, such as Delta, Schneider.
The PLC control system adopts the Delta brand, which is made in Taiwan and is reliable.
The bttom paper feeding is controlled by servo motor and stepping motor,which greatly improve paper feeding in high precision and
high efiency way.(more stable ,less troubles and save bottom paper)
Paper size :
2~16 oz (replaceable die, max cup height 136mm, max bottom width 76mm.)
70-80 per minute (the speed is affected by the size of the paper cup, paper quality and thickness), the running speed is stable, 75 per minute
|50/60 Hz.380V/220V (preferably use 380V, 3Phase) or special power requirements|
Total power :
6.5 kw, 7.5 kw.
|Total weight :||Gw /NW:1750 kgs/1650 Kgs.|
Excerpted from the Internet, for reference only
The structure of KN95 automatic mask machine
1.1 Fully automatic KN95
1.2 Introduction of automatic KN95 station
1.2.1 Principle of unwinding station:
1) Collect the actual position of the counterweight on each unwinding station through a potentiometer, control the output of the inverter combined with the coil diameter estimation algorithm and PID operation, and rotate the unwinding motor to adjust the counterweight to stabilize it at the corresponding target position , so as to achieve constant unwinding tension;
2) When the drive motor stops rotating, the feeding will make the fabric tighter and tighter. At this time, the roller on the left side of the rotating rod will be pulled up gradually until the sensor plate is detected by the sensor above, and the fabric roll starts to discharge;